An XGA , 5.200 Lumens Bright 3LCD Projector with a vast range of adjustment, and BrightEra for higher quality colour and a longer lifespan and superior images and a long-lasting, low maintenance performance.
High Resolution up to WUXGA*
High resolution display - up to WUXGA compatible, WUXGA (P554U/P474U) / WXGA (P554W/P474W) and XGA (P604X/P603X/PE523X) native resolution.
An image with higher or lower resolution than the projector’s native resolution (P554W/P474W: 1,280 × 800 / P604X/P603X/PE523X: 1,024 × 768) is displayed with Advanced AccuBlend.
Low TCO - Improved a Power Consumption and Longer Lamp Life
Select from Four Lamp Modes for Suitable Usage
ECO MODE (NORMAL and ECO) increases lamp life up to 8,000 hours, lowering power consumption and cutting down on CO2 emissions. There are four brightness modes: “OFF”, “AUTO ECO”, “NORMAL” and “ECO” modes.
The amount of CO2 emission reduction is displayed in the confirmation message when the power is switched off and in the INFO section of the on-screen menu.
Energy Saving Technology
Selecting “NORMAL” for “STANDBY MODE” from the menu puts the projector in power-saving mode that consumes only 0.14 W* (100 – 130 V AC) / 0.17 W** (200 – 240 V AC) in “STANDBY MODE”.
Easy Installation by Keystone Correction, Lens Shift and 1.7x Optical Zoom*
Easily Adjustment of the Position of the Projected Image
A vertical and horizontal lens shift mechanism offers installation flexibility. Manual lens shift can be adjusted by turning the dials on the top of the projector. The wide 1.7× optical zoom*, horizontal/vertical lens shift and keystone correction allow flexible settings in various locations.
Cornerstone and Pincushion Correction Function
Cornerstone uses 4-point corner to correct keystone distortion.Pincushion correction is available for curved boards.
Quick and Auto Function for Ease of Use
Quick Start, Quick Power Off and Direct Power Off
Six seconds*1 after turning on the power, the projector is ready to display PC or video images. The projector can be put away immediately after the projector is powered down. The “Direct Power Off” feature allows the projector to be turned off (even when projecting an image) by using the main power switch or disconnecting the AC power supply.
*1 The quick start time is available when [STANDBY MODE] is set to [NETWORK STANDBY] in the on-screen menu.
Auto Power On and Auto Power Off
The DIRECT POWER ON, AUTO POWER ON, AUTO POWER OFF, and OFF TIMER features eliminate the need to always use the POWER button on the remote control or projector cabinet. Auto power-on via the HDMI 1, HDMI 2 and COMPUTER input terminals occurs when a signal is detected from a computer. Power management automatically turns off the projector when an incoming signal is not detected from any of the inputs. An off-timer can be set to automatically turn off the projector at set countdown times.
A variety of Input/Output Terminals Including HDMI, HDBaseT* and Network Function
Built-in HDBaseT Support*
Simplify your installations with HDBaseT, which is optimised for video applications and supports uncompressed Full HD digital video, audio and various control signals. With only a single cable (up to 100 m) to run, infrastructure and labour costs are reduced, installations are significantly easier, and there is no cable clutter to manage. With uncompressed HD video support, images have never been more stunning. What is more, the control signals are contained in the same cable.
Wired / Wireless LAN Control Support
Thanks to the integrated LAN port (RJ-45), you can connect the projector with wired LAN and control it from a computer. Control can also be carried out via wireless LAN by installing the optional wireless LAN unit (NP05LM series) to this projector.
*Since image transfer is not supported, the optional MultiPresenter Stick is needed to transfer images.
No additional power source is needed as the stick is powered via the USB port.
Dual HDMI Inputs
Among the P554U series’ wide selection of inputs is HDMI with HDCP for connecting to high-definition sources such as Blu-ray players, cable boxes, satellite receivers and personal computers.
Convenient Utility Software (User Support Software)
Support of NaViSet Administrator 2, Virtual Remote Tool
NaViSet Administrator 2 helps you control the projector by a computer via wired LAN connection. Virtual Remote Tool helps you perform operations by a virtual remote control such as switching the power on or off and selecting a signal for the projector via a wired LAN connection. Moreover, it can send an image to the projector and register it as the logo data.
MethodThree primary colour liquid crystal shutter projection
Specifications of main parts
Liquid crystal panelSize0.63" (with MLA) × 3 (aspect ratio: 4:3)
Pixels*1786,432 (1,024 dots × 768 lines)
Projection lensesZoomManual (zoom ratio 1.7)
Throw ratio1.3 – 2.2
F-number Focus lengthF = 1.7 to 2.2 f = 17.4 to 29.0 mm
Lens shiftingManual (V = 0 – 50% / H = ±15%)
Lamp wattage*2305 W AC
Light source (Lamp) life*3ECO mode OFF4,000 H
Normal ECO mode6,000 H
ECO mode8,000 H
Light output*4 *5ECO mode OFF5,200 lumens
Normal ECO modeApprox. 86%
ECO modeApprox. 65%
Centre lumen (ECO mode OFF)*65,500 lumens
Contrast ratio*4 *5(all white / all black)18,000 : 1
with Iris & LAMP Power
Screen size (throw distance)
(Performance guarantee range)30" to 300"
(40" to 200")
Colour reproducibility10-bit colour processing (approx. 1.07 billion colours)
Quietness (ECO / Normal ECO / ECO mode off)34 dB / 34 dB / 37 dB
Synchronization rateHorizontal15 kHz to 100 kHz (24 kHz or greater for RGB inputs)
Vertical50 to 120 Hz (HDMI: 50 Hz to 85 Hz)
Maximum resolution (horizontal × vertical)Up to WUXGA (1,920 × 1,200) with Advanced AccuBlend
Keystone CorrectionHorizontalManual, Approx. ± 20 Max degrees
VerticalManual, Approx. ± 30 Max degrees
Input / output connectors
Computer / ComponentInputMini D-Sub 15-pin × 1
OutputMini D-Sub 15-pin × 1
Audio inputStereo mini jack × 1
Audio outputStereo mini jack × 1
HDMIVideo inputType A HDMI connector 19-pin × 2, Support HDCP*7
VideoinputRCA × 1
Audio inputRCA × 2 (L/R)
Wired LAN PortRJ-45 (100Base-TX / 10Base-T) × 1
(Control support only)
Wireless LAN Port (Optional)IEEE 802.11 b/g/n (optional USB Wireless LAN Unit required)
(Control support only)
PC control connectorD-Sub 9-pin × 1
USB portType A for USB memory and for supply of power (5V / 2A) to the MultiPresenter Stick × 1,
Type B for service × 1
Built-In Speaker20 W monaural × 1
Usage environmentOperating temperature: 5 to 40°C, Operating humidity: 20 to 80 %
(with no condensation)
(ECO mode selected automatically at / 35°C to 40°C)
Storage temperature: -10 to 50°C, Storage humidity: 20 to 80 %
(with no condensation)
Operating altitude: 0 to 2,700 m
(1,700 to 2,700 m: Set [FAN MODE] to [HIGH ALUTITUDE])
Power supply100 – 240 V AC, 50 / 60 Hz
Power consumptionECO mode OFF410 W (100 - 130 V)
388 W (200 - 240 V)
Normal ECO mode347 W (100 – 130 V)
334 W (200 – 240 V)
ECO mode273 W (100 – 130 V)
258 W (200 – 240 V)
(NETWORK)*82.0 W (100 – 130 V)
2.0 W (200 – 240 V)
(NORMAL)0.16 W (100 – 130 V)
0.2 W (200 – 240 V)
Rated input current4.7 A*9 – 1.8 A*10
Dimensions (W × H × D)420 × 133 × 322 mm (Net dimensions, not including protruding parts),
478 × 233 × 390 mm (Gross dimensions)
Weight4.7 kg, 6.4 kg (Gross weight)